Apex Model: SD140HV 19HP
The SD140HV 19HP Apex pump is one of the mid-sized models in the pumping range. This single impeller design makes it suitable for low volume dewatering appilcations. This pump model uses the same frame as the 13HP models and is capable of higher head requirements up to 140 ft of TDH. The portable design of the SD140HV 19HP also features adjustable polyurethane wear parts. Standard Impellers are 17-4 S.S. alloy.
| Motor Data | |
|---|---|
| Horsepower | 19 hp |
| Full load amp | 23 |
| RPM | 3600 |
| 3ph/60hz/460v | |
| Insulation Class | H (180C) |
| Thermal Overload Contacts | |
| Opening Temperature | 130C |
| Start | Y |
| Material | |
| Outer Casing | Aluminum |
| Discharge | Aluminum - 6" |
| Stator Housing | Aluminum |
| Stainer | Steel/Powder Coated |
| Wear Parts | Polyurethane |
| Impeller | 17-4 S.S. |
| Rotor Shaft | 400 Series Stainless Steel |
| Seal Material | |
| Cemented Tungsten Carbide in Stainless Steel Holder | |
| Weight | |
| Total (Less cable) | 198 lbs |